HN-Series amplifier is highly compact Class-D mixer amplifier solution featuring with integrated audio source, 5 zone selectors, volume control of each input, equalizer and 5 zone paging station. With precise understanding of the needs of simple applications, HN-series not only provides stable performance of Class-D amplifier, but also increases value from the utilization of each function.
X-DA4125EN supports both balanced and unbalanced audio inputs.To receive unbalanced audio inputs, simply connect the ground port with the negative input port to the rear panel. X-DA4125EN can receive audio signal from XDCS2000/EN via Ethernet through the RJ45 standard port
X-DA4125EN can self-protect from overheat, over current, over voltage and under voltage. For example, when the internal temperature reaches its critical limit, the overheat protection circuit will shut down the power amplification module and activate the protection indicator light on the front panel. X-DA4125EN can detect power supply errors automatically during operation.The built-in fuse will provide over current protection to the main power supply.
The device adopts lightweight design. The front panel is made of UL94V-0 fire proof ABS material, protecting the machine under extreme conditions. A cooling fan is equipped for heat exhaustion so that the machine can maintain high working efficiency. The amplifier can work without main power in emergency
When HN-D32N Noise Detector is installed, X-DA4125EN can adjust volume according to the ambient noise automatically to ensure high sound intelligibility.
X-DA4125EN is the Class-D amplifier and it is lighter, more stable, and high efficiency. The audio transmission is completely digitalized which makes it free from interference and easy to be controlled. It also has 24 VDC backup power supply conforming to international voice alarm standard which is the perfect choice for safety required applications.When a shout circuit is detected in the main power supply circuit, the power will be automatically shut down.The backup power supply will then be enabled to replace the main one. When a fault, self-protection or self-testing happens, its audio input fault port on the rear panel will short circuit and a fault signal will then be sent to the control unit in the network.
